New Member
Joined:
Mar 2010
Posts:
60
Feedback:
Points:
618
Location:
Juneau, AK.
Months ago | 19th February 2012 00:35
@ Gnarled
I felt the same about the Concords I got, same too much glue and has weird white glue/goop above sole by the toe I could not get off. Thought of going at it with plastic razor blade but too scared
Got Spizikes white/red first release with Mars grey elephant print messenger bag DSIB
Retro Black/Cement 3s VNDS
Retro Concords VNDS
New Member
Joined:
Nov 2010
Posts:
92
Feedback:
Points:
5,381
Location:
Phoenix, Az
Months ago | 2nd March 2012 15:18
im looking into making custom recons.. i have all the material needed but have a few questions.
1. whats some good glue recommendations? im using barge and powerbond
2. im using a brother cs6000i, is this good? for some reason it wont sew the fabric with the og backing from the donor back onto the mid panel. is it because the needle isnt strong enough or?.. im lost?
3. what sz stitch do i use thats close if not the same length as nike uses?
any kind of help is appreciated. thank you.
SELL ME YOUR CRACKED/BEAT OG'S!.. SELL ME YOUR BEATERS, NEED SOLE SWAP DONORS!!
Frequent Visitor
Joined:
Jul 2008
Posts:
267
Feedback:
Points:
3,532
Months ago | 5th March 2012 21:38
The current swingman LeBron 9,
I was thinking of outlining the swoosh with the same green.
What painting tool would I use to do so? I
s angelus the best to use on it?
The neatest and cleanest way to mask off the parts I don't want to paint ?
If I do get paint on a part I don't want how can I clean it without messing up the 3 m?
Otherwise is there a customizer in NY that can do this for me?
jordans in 10 and 10.5 for sale. PM me for listing.
@ Gnarled
I felt the same about the Concords I got, same too much glue and has weird white glue/goop above sole by the toe I could not get off. Thought of going at it with plastic razor blade but too scared
I am interested in buying a sewing machine to start doing some reconstruction work. Does anyone have any recommendations on what to look for when purchasing a sewing machine? Do I need to purchase a machine that does zigzag stitching? I have about $600-$800 saved up that I can spend. Any advice is greatly appreciated.
Doing my first paint splatter turned out pretty good, as you can see on the "Duke" CW Kobe IV I did here. It was a bit messy though, used a toothbrush and ran a toothpick across it. Results were good but got splatter spraying all over LOL. Just curious if anyone had any other ideas on how to get decent splatter results.
[IMG]http://i388.photobucket.com/albums/oo323/phreakph23/fdfec057.jpg[/IMG]
[quote="phreak23"]Doing my first paint splatter turned out pretty good, as you can see on the "Duke" CW Kobe IV I did here. It was a bit messy though, used a toothbrush and ran a toothpick across it. Results were good but got splatter spraying all over LOL. Just curious if anyone had any other ideas on how to get decent splatter results.
[IMG]http://i388.photobucket.com/albums/oo323/phreakph23/fdfec057.jpg[/IMG][/quote]
I've used a straw before. Just dip the straw in paint and then blow through the straw to get the paint to splatter on the shoe.
I'm trying to paint the Nike logo on my Hyperfuses. Anyone can help me on what kind of paint would be good to use??
[img]http://counterkicks.com/wp-content/uploads/2010/06/Nike-Hyperfuse-Black-Black-Dark-Grey-1.jpg[/img]
How do I make rubber soles glow in the dark?
im looking into making custom recons.. i have all the material needed but have a few questions.
1. whats some good glue recommendations? im using barge and powerbond
2. im using a brother cs6000i, is this good? for some reason it wont sew the fabric with the og backing from the donor back onto the mid panel. is it because the needle isnt strong enough or?.. im lost?
3. what sz stitch do i use thats close if not the same length as nike uses?
any kind of help is appreciated. thank you.
:up: :up: :up: :up:
The current swingman LeBron 9,
I was thinking of outlining the swoosh with the same green.
What painting tool would I use to do so? I
s angelus the best to use on it?
The neatest and cleanest way to mask off the parts I don't want to paint ?
If I do get paint on a part I don't want how can I clean it without messing up the 3 m?
Otherwise is there a customizer in NY that can do this for me?
does anyone know if forcefields work well on jordans like i am not running around in them
does anyone know how to make 99 white cement 4s colorway for the midsoles? the cement gray? please help.
